Agrandir l'image 
Couple de sortie :160*2 kNm
Largeur de paroi :0.8-1.5 m
Profondeur de paroi :120 m
Délai de livraison :
Expédition :
Contactez le service client pour négocier les détails d’expédition, Profitez Garantie de livraison à temps
Service après-vente :1. Service en ligne : échantillons, spécifications techniques, manuels d’utilisation, achat de pièces de rechange. 2. Service vidéo : conseils d’application, dépannage et conseils de maintenance. 3. Service à l’étranger : MachPlaza dispose d’une équipe complète de service après-vente mondiale. Veuillez noter que si le contrat de vente ne contient pas de clause claire de responsabilité après-vente, nous facturerons les frais de service nécessaires.
Caractéristique
LIUGONG SX50 Multi Functional Drilling Rig
The SX50 double-wheel milling machine for diaphragm wall construction has great advantages over the traditional diaphragm wall construction technology (diaphragm wall grab technology). Suitable for a wide range of ground conditions, precise verticality of the forming trench, reliable wall joints, low noise and vibration pollution, easy disposal of spoil, and user-friendly design of the manoeuvring system.
1) Applicable to various stratum conditions
It is suitable for trenching construction in various strata, especially hard strata and embedded rock trenching construction.
2) Air lifting and slag discharge
The air compressor is used for air lifting and slag discharge, and the slag discharge pipe adopts expansion and contraction, reasonable slag suction arrangement and large diameter slag discharge pipe, with high construction efficiency and good effect of slag removal in the trench.
High efficiency and good effect of slag removal in the trench.
3）Accurate verticality of the trench
– The slag discharge pipe in the centre of the frame, the design of double lifting points and the symmetrical layout of oil and gas pipes make the milling wheel frame always in a balanced state of force;
– Measuring system for real-time monitoring of verticality during slot milling;
– Intelligent deviation correction system for real-time adjustment of milling deviation.
4) Sleeve milling joint
Adopting the “sleeve milling” technology for the concrete of the adjacent phase 1 trench, which can be used for the construction of diaphragm wall at various depths.
5）Low noise, low vibration and less pollution
Low noise, low vibration, less pollution, can be used in the neighbouring building pit into the trench construction.
6）Slag material separation, slurry recycling
The closed slag classification system and mud circulation system minimise the discharge of slag and make the mud recyclable.
7）Humanised control system
Ergonomic design, reliable and practical control elements, clear and easy to understand display.
8) Milling/gripping “two machines in one”.
Double winches and double lifting points lift the double-wheeled milling frame, facilitating quick switching between the functions of double-wheeled milling and hydraulic grabs.
Paramètre
| Largeur de paroi | 0.8-1.5 m |
| Profondeur de paroi | 120 m |
| Couple de sortie de la fraiseuse à tranchée | 100×2/160x2 kN·m |
| Vitesse de rotation max de la fraiseuse à tranchée | 0-25/0-15 rpm |
| Force de traction du treuil | 2×400 kN |
| Pression du système | 33 MPa |
| Débit de la pompe principale | 2×435+144+400 L/min |
| Poids de la roue de coupe | 40-50(B=1500) t |
| Poids total (sans roue de coupe) | 128 t |
| Diesel | Cummins QSX15 |
| Vitesse de rotation de puissance | 380@1800 rpm |
| Moteur électrique | Y315L |
| Système | 160 kW |
| Modèle du train de roulement | JT100 |
| Distance extérieure des patins | 3500-5000 mm |
| Largeur des patins | 900 mm |
| Force de traction | 818 kN |
| Vitesse de déplacement | 1.5 km/h |
Demander un devis
